EnglishEspañol

Rotary Evaporator Ai SolventVap 13G/50L Motorized Manual Lift

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the processuch more efficient. Each unit is also equipped with an easy−to−use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99℃ (210℉) with PID temperature control stepping at 0.1℃ increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built−in overheat protector will shut down power, should the controller fail.

$11,990.00$14,890.00

Clear

Description

Ai SolventVap 50L

220V 50/60Hz single phase, 29A, 400 watts (rotation speed:400 watts)

High borosilicate glass 3.3

Evaporating flask

  • Capacity: 13.2 gallon (50 liters or 1.8 cu ft)
  • Maximum load: Not to exceed 60%of the flask’s capacity
  • Sealing flange: 4.9 diameter
  • Rotation speed: 10 to 110 rpm
  • Evaporating speed: 2 gallon/hour (water), 4 gallon/hour (alcohol)

Receiving flask

  • 5.28 gallon (20 liters or 0.7 cu ft)

Condenser

  • Glassware: Main auxiliary triple−circulating cold traps, vertical
  • Chilling fluid connection: 3/8 hose barb x 4 (2 on main 2 on auxiliary)

Condensing surface

  • Main condenser: 11,500 cm2 or 12.4 sq ft
  • Auxiliary condenser: 4,000 cm2 or 4.3 sq ft

Working environment

  • 5 to 95℉

Electrical requirements

Brand

Across International

Across International is an industry leader in the manufacture of heat treatment, laboratory, and material processing equipment.

Additional information

Weight 625 lbs
Dimensions 46 × 28 × 58 in
UL Certification

Yes,Add UL/ETL/CSA Certification, No, I do not need the certification